注塑机电控永磁快速换模系统

您的当前位置:主页 > 产品介绍 > 注塑机电控永磁快速换模系统

     


注塑机电控永磁快速换模系统

Electropermanent magnetic system for quick mold clamping on injection machine

  
●   快速换模,时间效率节约90%

●   Rapidity of clamping,Saving 90% time

●   换模工人劳动强度降低,无需人工装夹

●   Reducing labor intensity

●   人力成本,人工成本节约2/3

●   Saving 2/3 labor costs

 





注塑机电控永磁快速换模系统产品优点

Features of electropermanent magnetic system for quick mold clamping on injection machine

  

1、更换安装模具可节省更多时间

The system saves more time for mold changing and clamping

2、操作简单方便,操作工不需要特殊的技能就可在机器外部更换模具。

A single operator , without special skills ,can change the mold simply and conveniently outside injection machine.

3、最大限度地利用机器的有效空间,实现小注塑机加工大模具

Larger moulds Can be used in smaller machines,because the system saves more space.

4、使用时效持久,不需要对机器模板及模具背板进行任何修改

The system has a stable performance. The machine platens and the mold backboards need not to be modified or changed..

5、大大降低人工成本和员工的工作强度。

The system greatly reduces labor costs and the working strength

6、磁力强劲且恒定,无需持续的电能,也不会产生热量

The system has constant and strong force,scarcely consumes any electrical energy or generats any heat.

7、降低库存,减少废料

The system is the most complete answer to JIT(Just In Time) and SMED(Single Minute Die exchange).It helps to reduce inventory,to reduce scrap.

8、几乎没有维护成本

The system almost does not need maintenance costs.





 

标准配置:
Standard configuration:

●   永磁模板厚度:38MM/56MM;Permanent magnet template thickness: 38mm / 56mm
●   永磁模板材質:墙板覆盖式安装;优质低碳钢基体,120℃耐温,全防水、耐油、抗老化设计;双极性磁力线对流技术设计,基板为中性不带磁,磁力线集中无散射,平均吸力大于单极性的磁力感应技术;Permanent magnet template material: Wall panel covering installation; high quality low carbon steel substrate 120 ℃ temperature resistance, full waterproof, oil resistance, anti-aging design; Bipolar magnetic line convection technology design, the substrate is neutral no magnetic, magnetic line concentration no scattering, Magnetic force induction technique with average suction greater than unipole;
●   固定侧磁力模板(FPL)为多层高强度屏蔽电缆线;高强度、可拆卸式中心定位环;含两只接近微距传感器,0.2mm检测精度;The FPLs are multilayer high strength shielded cable, high strength, detachable central positioning ring, and two close to micro sensors (0.2mm).
●   可动侧磁力模板(MPL)为专用高柔性运动电缆线,预留顶出孔设计;含两只接近微距传感器,0.2mm检测精度;The movable side magnetic force template (MPL) is a special high flexible moveable cable with special design of preset outlet, including two close to micro sensors (0.2mm precision), and a special high flexible moveable cable (MPLs), which is designed as a special high flexible moveable cable.
●   系统具备微距接近传感、磁通量传感、磁饱和传感、预警系统、温度传感、自动停机等功能;The system has the functions of micro-proximity sensing, magnetic flux sensing, magnetic saturation sensing, warning system, temperature sensing, automatic shutdown and so on.
●    配备模具定位裝置;Equipped with mould positioning device;
●   电控系统为AC380V±10%,50Hz±1%供电,含供电缆线;The electric control system is supplied by AC380V ±10 + 50 Hz ±1%, including cable.
●   触摸屏、控制器、手操器多重独立控制充退磁操作;Touch screen, controller, hand manipulator dual independent control demagnetization operation;
●   固定侧及可动侧磁力模板配备安全链、预留压板孔;Fixed side and movable side magnetic force template equipped with safety chain, reserved pressure plate hole;
●   配备欧规(EUROMAP)70.0或70.1接口。Equipped with EUROMAPA 70.0 or 70.1 interface.











      质保条款Warranty clause

●    质保期2years (从使用单位验收之日起);2 years warranty period ( from the date of acceptance of the unit of use ) ;
●    质保期除正常消耗品外,无偿提供正常使用下损坏之零部件;Quality guarantee period in addition to normal consumables, free of charge under normal use of damaged parts;
●   設备之各项零件確确10年內不餘匱乏(同等規格的可替代零件);All parts of the equipment are indeed in short supply within 10 years (equivalent specifications can be replaced by parts);
●    重要备品零件72H內送达工厂;Important spare parts within 72H delivered to the factory;
●    設备于一般上班期間故障廠商由技術部人員通知後1小時內回覆,並於12小時內派人員至工廠處理故障事宜;In general, the equipment is returned within 1 hours after the fault manufacturer is notified by the personnel of the technical department and dispatched personnel to the factory within 12 hours to deal with the trouble.
●   設备於假日期間故障廠商與维修人員通知後1小時內回覆,並於24小時內派人員至工廠處 理故障事宜。The equipment will be answered within 1 hour after notice from the manufacturer and the maintenance staff during the holiday period, and personnel will be sent to the factory within 24 hours to take care of the malfunction.



   
注塑机电控永磁快速换模系统应用Application of electronic control permanent magnet rapid die changing system for injection molding machine


   3300吨海天注塑机磁力模板



     2800吨海天注塑机磁力模板





    2500吨乐星注塑机磁力模板




    2400吨海天注塑机磁力模板加工中





    2100吨注塑机磁力模板





   1900吨双色机磁力模板



   1880吨注塑机磁力模板



   1150吨科斯吗啡注塑机磁力模板



   1300吨双色机磁力模板










   800吨恩格尔注塑机磁力模板